SMTP(8)                                                                SMTP(8)

NAME
       smtp - Postfix SMTP+LMTP client

SYNOPSIS
       smtp [generic Postfix daemon options]

DESCRIPTION
       The  Postfix SMTP+LMTP client implements the SMTP and LMTP
       mail delivery protocols.  It  processes  message  delivery
       requests  from the queue manager. Each request specifies a
       queue file, a sender address, a domain or host to  deliver
       to, and recipient information.  This program expects to be
       run from the master(8) process manager.

       The SMTP+LMTP client updates  the  queue  file  and  marks
       recipients  as  finished,  or it informs the queue manager
       that delivery should be  tried  again  at  a  later  time.
       Delivery   status  reports  are  sent  to  the  bounce(8),
       defer(8) or trace(8) daemon as appropriate.

       The SMTP+LMTP client looks up a  list  of  mail  exchanger
       addresses  for  the  destination  host,  sorts the list by
       preference, and connects to each listed address  until  it
       finds a server that responds.

       When  a  server  is  not  reachable, or when mail delivery
       fails due to a recoverable error condition, the  SMTP+LMTP
       client  will try to deliver the mail to an alternate host.

       After a successful mail transaction, a connection  may  be
       saved to the scache(8) connection cache server, so that it
       may be used by  any  SMTP+LMTP  client  for  a  subsequent
       transaction.

       By  default, connection caching is enabled temporarily for
       destinations that have a high volume of mail in the active
       queue.  Connection  caching can be enabled permanently for
       specific destinations.

SMTP DESTINATION SYNTAX
       SMTP destinations have the following form:

       domainname

       domainname:port
              Look up  the  mail  exchangers  for  the  specified
              domain, and connect to the specified port (default:
              smtp).

       [hostname]

       [hostname]:port
              Look up the address(es) of the specified host,  and
              connect to the specified port (default: smtp).

       [address]

       [address]:port
              Connect  to  the host at the specified address, and
              connect to the specified port (default:  smtp).  An
              IPv6 address must be formatted as [ipv6:address].

LMTP DESTINATION SYNTAX
       LMTP destinations have the following form:

       unix:pathname
              Connect  to  the  local  UNIX-domain server that is
              bound to the specified  pathname.  If  the  process
              runs  chrooted, an absolute pathname is interpreted
              relative to the Postfix queue directory.

       inet:hostname

       inet:hostname:port

       inet:[address]

       inet:[address]:port
              Connect to the specified TCP port on the  specified
              local or remote host. If no port is specified, con-
              nect to the port defined as  lmtp  in  services(4).
              If no such service is found, the lmtp_tcp_port con-
              figuration parameter (default value of 24) will  be
              used.    An  IPv6  address  must  be  formatted  as
              [ipv6:address].

SECURITY
       The SMTP+LMTP client is moderately security-sensitive.  It
       talks  to  SMTP  or LMTP servers and to DNS servers on the
       network. The SMTP+LMTP client can be run chrooted at fixed
       low privilege.

STANDARDS
       RFC 821 (SMTP protocol)
       RFC 822 (ARPA Internet Text Messages)
       RFC 1651 (SMTP service extensions)
       RFC 1652 (8bit-MIME transport)
       RFC 1870 (Message Size Declaration)
       RFC 2033 (LMTP protocol)
       RFC 2034 (SMTP Enhanced Error Codes)
       RFC 2045 (MIME: Format of Internet Message Bodies)
       RFC 2046 (MIME: Media Types)
       RFC 2554 (AUTH command)
       RFC 2821 (SMTP protocol)
       RFC 2920 (SMTP Pipelining)
       RFC 3207 (STARTTLS command)
       RFC 3461 (SMTP DSN Extension)
       RFC 3463 (Enhanced Status Codes)
       RFC 4954 (AUTH command)

DIAGNOSTICS
       Problems  and transactions are logged to syslogd(8).  Cor-
       rupted message files are marked so that the queue  manager
       can move them to the corrupt queue for further inspection.

       Depending on the setting of the notify_classes  parameter,
       the  postmaster is notified of bounces, protocol problems,
       and of other trouble.

BUGS
       SMTP and LMTP connection caching does not work  with  TLS.
       The  necessary  support for TLS object passivation and re-
       activation does not exist  without  closing  the  session,
       which defeats the purpose.

       SMTP and LMTP connection caching assumes that SASL creden-
       tials are valid for all destinations  that  map  onto  the
       same IP address and TCP port.

CONFIGURATION PARAMETERS
       Before  Postfix version 2.3, the LMTP client is a separate
       program that implements only a subset of the functionality
       available with SMTP: there is no support for TLS, and con-
       nections are cached in-process, making it ineffective when
       the client is used for multiple domains.

       Most  smtp_xxx  configuration  parameters have an lmtp_xxx
       "mirror" parameter for the equivalent LMTP  feature.  This
       document describes only those LMTP-related parameters that
       aren't simply "mirror" parameters.

       Changes to main.cf are picked up automatically, as smtp(8)
       processes  run  for only a limited amount of time. Use the
       command "postfix reload" to speed up a change.

       The text below provides  only  a  parameter  summary.  See
       postconf(5) for more details including examples.

COMPATIBILITY CONTROLS
       ignore_mx_lookup_error (no)
              Ignore DNS MX lookups that produce no response.

       smtp_always_send_ehlo (yes)
              Always send EHLO at the start of an SMTP session.

       smtp_never_send_ehlo (no)
              Never send EHLO at the start of an SMTP session.

       smtp_defer_if_no_mx_address_found (no)
              Defer  mail  delivery when no MX record resolves to
              an IP address.

       smtp_line_length_limit (990)
              The maximal length of message header and body lines
              that Postfix will send via SMTP.

       smtp_pix_workaround_delay_time (10s)
              How  long  the  Postfix  SMTP  client pauses before
              sending ".<CR><LF>" in order to work around the PIX
              firewall "<CR><LF>.<CR><LF>" bug.

       smtp_pix_workaround_threshold_time (500s)
              How  long a message must be queued before the Post-
              fix  SMTP  client  turns  on   the   PIX   firewall
              "<CR><LF>.<CR><LF>"  bug  workaround  for  delivery
              through firewalls with "smtp fixup" mode turned on.

       smtp_pix_workarounds (disable_esmtp, delay_dotcrlf)
              A  list that specifies zero or more workarounds for
              CISCO PIX firewall bugs.

       smtp_pix_workaround_maps (empty)
              Lookup tables, indexed by the  remote  SMTP  server
              address, with per-destination workarounds for CISCO
              PIX firewall bugs.

       smtp_quote_rfc821_envelope (yes)
              Quote addresses in SMTP MAIL FROM and RCPT TO  com-
              mands as required by RFC 821.

       smtp_skip_5xx_greeting (yes)
              Skip SMTP servers that greet with a 5XX status code
              (go away, do not try again later).

       smtp_skip_quit_response (yes)
              Do not wait for the response to the SMTP QUIT  com-
              mand.

       Available in Postfix version 2.0 and earlier:

       smtp_skip_4xx_greeting (yes)
              Skip SMTP servers that greet with a 4XX status code
              (go away, try again later).

       Available in Postfix version 2.2 and later:

       smtp_discard_ehlo_keyword_address_maps (empty)
              Lookup tables, indexed by the  remote  SMTP  server
              address,  with  case insensitive lists of EHLO key-
              words (pipelining, starttls, auth, etc.)  that  the
              Postfix   SMTP  client  will  ignore  in  the  EHLO
              response from a remote SMTP server.

       smtp_discard_ehlo_keywords (empty)
              A case insensitive list of EHLO keywords  (pipelin-
              ing,  starttls,  auth,  etc.) that the Postfix SMTP
              client will ignore in  the  EHLO  response  from  a
              remote SMTP server.

       smtp_generic_maps (empty)
              Optional lookup tables that perform address rewrit-
              ing in the SMTP client, typically  to  transform  a
              locally valid address into a globally valid address
              when sending mail across the Internet.

       Available in Postfix version 2.2.9 and later:

       smtp_cname_overrides_servername (version dependent)
              Allow DNS CNAME records to override the  servername
              that the Postfix SMTP client uses for logging, SASL
              password lookup, TLS policy decisions, or TLS  cer-
              tificate verification.

       Available in Postfix version 2.3 and later:

       lmtp_discard_lhlo_keyword_address_maps (empty)
              Lookup  tables,  indexed  by the remote LMTP server
              address, with case insensitive lists of  LHLO  key-
              words  (pipelining,  starttls, auth, etc.) that the
              LMTP client will ignore in the LHLO response from a
              remote LMTP server.

       lmtp_discard_lhlo_keywords (empty)
              A  case insensitive list of LHLO keywords (pipelin-
              ing, starttls, auth, etc.)  that  the  LMTP  client
              will ignore in the LHLO response from a remote LMTP
              server.

       Available in Postfix version 2.4.4 and later:

       send_cyrus_sasl_authzid (no)
              When authenticating to a remote SMTP or LMTP server
              with  the default setting "no", send no SASL autho-
              riZation ID (authzid); send only the SASL authenti-
              Cation ID (authcid) plus the authcid's password.

       Available in Postfix version 2.5 and later:

       smtp_header_checks (empty)
              Restricted  header_checks(5) tables for the Postfix
              SMTP client.

       smtp_mime_header_checks (empty)
              Restricted  mime_header_checks(5)  tables  for  the
              Postfix SMTP client.

       smtp_nested_header_checks (empty)
              Restricted  nested_header_checks(5)  tables for the
              Postfix SMTP client.

       smtp_body_checks (empty)
              Restricted body_checks(5) tables  for  the  Postfix
              SMTP client.

MIME PROCESSING CONTROLS
       Available in Postfix version 2.0 and later:

       disable_mime_output_conversion (no)
              Disable  the  conversion of 8BITMIME format to 7BIT
              format.

       mime_boundary_length_limit (2048)
              The  maximal  length  of  MIME  multipart  boundary
              strings.

       mime_nesting_limit (100)
              The maximal recursion level that the MIME processor
              will handle.

EXTERNAL CONTENT INSPECTION CONTROLS
       Available in Postfix version 2.1 and later:

       smtp_send_xforward_command (no)
              Send the non-standard  XFORWARD  command  when  the
              Postfix  SMTP  server EHLO response announces XFOR-
              WARD support.

SASL AUTHENTICATION CONTROLS
       smtp_sasl_auth_enable (no)
              Enable SASL  authentication  in  the  Postfix  SMTP
              client.

       smtp_sasl_password_maps (empty)
              Optional  SMTP  client lookup tables with one user-
              name:password entry per remote hostname or  domain,
              or sender address when sender-dependent authentica-
              tion is enabled.

       smtp_sasl_security_options (noplaintext, noanonymous)
              Postfix SMTP client SASL security  options;  as  of
              Postfix  2.3 the list of available features depends
              on the SASL client implementation that is  selected
              with smtp_sasl_type.

       Available in Postfix version 2.2 and later:

       smtp_sasl_mechanism_filter (empty)
              If  non-empty, a Postfix SMTP client filter for the
              remote SMTP server's list of  offered  SASL  mecha-
              nisms.

       Available in Postfix version 2.3 and later:

       smtp_sender_dependent_authentication (no)
              Enable sender-dependent authentication in the Post-
              fix SMTP client; this is available only  with  SASL
              authentication,   and   disables   SMTP  connection
              caching to ensure that mail from different  senders
              will use the appropriate credentials.

       smtp_sasl_path (empty)
              Implementation-specific  information that the Post-
              fix SMTP client passes through to the SASL  plug-in
              implementation     that     is     selected    with
              smtp_sasl_type.

       smtp_sasl_type (cyrus)
              The SASL plug-in type that the Postfix SMTP  client
              should use for authentication.

       Available in Postfix version 2.5 and later:

       smtp_sasl_auth_cache_name (empty)
              An  optional table to prevent repeated SASL authen-
              tication failures with the same remote SMTP  server
              hostname, username and password.

       smtp_sasl_auth_cache_time (90d)
              The  maximal  age  of  an smtp_sasl_auth_cache_name
              entry before it is removed.

       smtp_sasl_auth_soft_bounce (yes)
              When a remote SMTP server rejects a SASL  authenti-
              cation  request  with  a 535 reply code, defer mail
              delivery instead of returning  mail  as  undeliver-
              able.

STARTTLS SUPPORT CONTROLS
       Detailed  information  about STARTTLS configuration may be
       found in the TLS_README document.

       smtp_tls_security_level (empty)
              The default SMTP TLS security level for the Postfix
              SMTP  client;  when a non-empty value is specified,
              this    overrides    the    obsolete     parameters
              smtp_use_tls,         smtp_enforce_tls,         and
              smtp_tls_enforce_peername.

       smtp_sasl_tls_security_options           ($smtp_sasl_secu-
       rity_options)
              The SASL authentication security options  that  the
              Postfix  SMTP  client  uses  for TLS encrypted SMTP
              sessions.

       smtp_starttls_timeout (300s)
              Time limit for Postfix SMTP client write  and  read
              operations  during  TLS  startup and shutdown hand-
              shake procedures.

       smtp_tls_CAfile (empty)
              The file with the certificate of the  certification
              authority  (CA) that issued the Postfix SMTP client
              certificate.

       smtp_tls_CApath (empty)
              Directory with  PEM  format  certificate  authority
              certificates  that  the Postfix SMTP client uses to
              verify a remote SMTP server certificate.

       smtp_tls_cert_file (empty)
              File with the Postfix SMTP client  RSA  certificate
              in PEM format.

       smtp_tls_mandatory_ciphers (medium)
              The  minimum TLS cipher grade that the Postfix SMTP
              client will use with mandatory TLS encryption.

       smtp_tls_exclude_ciphers (empty)
              List of ciphers or cipher types to exclude from the
              Postfix SMTP client cipher list at all TLS security
              levels.

       smtp_tls_mandatory_exclude_ciphers (empty)
              Additional list  of  ciphers  or  cipher  types  to
              exclude  from the SMTP client cipher list at manda-
              tory TLS security levels.

       smtp_tls_dcert_file (empty)
              File with the Postfix SMTP client  DSA  certificate
              in PEM format.

       smtp_tls_dkey_file ($smtp_tls_dcert_file)
              File  with  the Postfix SMTP client DSA private key
              in PEM format.

       smtp_tls_key_file ($smtp_tls_cert_file)
              File with the Postfix SMTP client RSA  private  key
              in PEM format.

       smtp_tls_loglevel (0)
              Enable  additional  Postfix  SMTP client logging of
              TLS activity.

       smtp_tls_note_starttls_offer (no)
              Log the hostname  of  a  remote  SMTP  server  that
              offers  STARTTLS,  when  TLS is not already enabled
              for that server.

       smtp_tls_policy_maps (empty)
              Optional lookup tables with the Postfix SMTP client
              TLS security policy by next-hop destination; when a
              non-empty value is specified,  this  overrides  the
              obsolete smtp_tls_per_site parameter.

       smtp_tls_mandatory_protocols (SSLv3, TLSv1)
              List  of  SSL/TLS  protocols  that the Postfix SMTP
              client will use with mandatory TLS encryption.

       smtp_tls_scert_verifydepth (9)
              The verification depth for remote SMTP server  cer-
              tificates.

       smtp_tls_secure_cert_match (nexthop, dot-nexthop)
              The server certificate peername verification method
              for the "secure" TLS security level.

       smtp_tls_session_cache_database (empty)
              Name of the file containing  the  optional  Postfix
              SMTP client TLS session cache.

       smtp_tls_session_cache_timeout (3600s)
              The expiration time of Postfix SMTP client TLS ses-
              sion cache information.

       smtp_tls_verify_cert_match (hostname)
              The server certificate peername verification method
              for the "verify" TLS security level.

       tls_daemon_random_bytes (32)
              The  number  of pseudo-random bytes that an smtp(8)
              or smtpd(8) process  requests  from  the  tlsmgr(8)
              server  in order to seed its internal pseudo random
              number generator (PRNG).

       tls_high_cipherlist
       (ALL:!EXPORT:!LOW:!MEDIUM:+RC4:@STRENGTH)
              The OpenSSL cipherlist for "HIGH" grade ciphers.

       tls_medium_cipherlist (ALL:!EXPORT:!LOW:+RC4:@STRENGTH)
              The OpenSSL cipherlist for "MEDIUM" or higher grade
              ciphers.

       tls_low_cipherlist (ALL:!EXPORT:+RC4:@STRENGTH)
              The  OpenSSL  cipherlist  for "LOW" or higher grade
              ciphers.

       tls_export_cipherlist (ALL:+RC4:@STRENGTH)
              The OpenSSL cipherlist for "EXPORT" or higher grade
              ciphers.

       tls_null_cipherlist (eNULL:!aNULL)
              The  OpenSSL  cipherlist  for  "NULL" grade ciphers
              that provide authentication without encryption.

       Available in Postfix version 2.4 and later:

       smtp_sasl_tls_verified_security_options
       ($smtp_sasl_tls_security_options)
              The SASL authentication security options  that  the
              Postfix  SMTP  client  uses  for TLS encrypted SMTP
              sessions with a verified server certificate.

       Available in Postfix version 2.5 and later:

       smtp_tls_fingerprint_cert_match (empty)
              List of acceptable remote SMTP  server  certificate
              fingerprints  for  the  "fingerprint"  TLS security
              level (smtp_tls_security_level = fingerprint).

       smtp_tls_fingerprint_digest (md5)
              The message  digest  algorithm  used  to  construct
              remote SMTP server certificate fingerprints.

OBSOLETE STARTTLS CONTROLS
       The  following configuration parameters exist for compati-
       bility with Postfix versions before 2.3. Support for these
       will be removed in a future release.

       smtp_use_tls (no)
              Opportunistic  mode:  use  TLS  when  a remote SMTP
              server announces STARTTLS support,  otherwise  send
              the mail in the clear.

       smtp_enforce_tls (no)
              Enforcement  mode: require that remote SMTP servers
              use TLS encryption, and  never  send  mail  in  the
              clear.

       smtp_tls_enforce_peername (yes)
              With  mandatory  TLS  encryption,  require that the
              remote SMTP server hostname matches the information
              in the remote SMTP server certificate.

       smtp_tls_per_site (empty)
              Optional lookup tables with the Postfix SMTP client
              TLS usage policy by  next-hop  destination  and  by
              remote SMTP server hostname.

       smtp_tls_cipherlist (empty)
              Obsolete Postfix < 2.3 control for the Postfix SMTP
              client TLS cipher list.

RESOURCE AND RATE CONTROLS
       smtp_destination_concurrency_limit      ($default_destina-
       tion_concurrency_limit)
              The maximal number of parallel  deliveries  to  the
              same  destination  via  the  smtp  message delivery
              transport.

       smtp_destination_recipient_limit        ($default_destina-
       tion_recipient_limit)
              The maximal number of recipients per  delivery  via
              the smtp message delivery transport.

       smtp_connect_timeout (30s)
              The  SMTP  client  time  limit for completing a TCP
              connection,  or  zero  (use  the  operating  system
              built-in time limit).

       smtp_helo_timeout (300s)
              The  SMTP client time limit for sending the HELO or
              EHLO command, and for receiving the initial  server
              response.

       lmtp_lhlo_timeout (300s)
              The  LMTP  client  time  limit for sending the LHLO
              command,  and  for  receiving  the  initial  server
              response.

       smtp_xforward_timeout (300s)
              The SMTP client time limit for sending the XFORWARD
              command, and for receiving the server response.

       smtp_mail_timeout (300s)
              The SMTP client time limit  for  sending  the  MAIL
              FROM   command,   and   for  receiving  the  server
              response.

       smtp_rcpt_timeout (300s)
              The SMTP client time limit  for  sending  the  SMTP
              RCPT  TO  command,  and  for  receiving  the server
              response.

       smtp_data_init_timeout (120s)
              The SMTP client time limit  for  sending  the  SMTP
              DATA   command,   and   for  receiving  the  server
              response.

       smtp_data_xfer_timeout (180s)
              The SMTP client time limit  for  sending  the  SMTP
              message content.

       smtp_data_done_timeout (600s)
              The  SMTP  client  time  limit for sending the SMTP
              ".", and for receiving the server response.

       smtp_quit_timeout (300s)
              The SMTP client time limit  for  sending  the  QUIT
              command, and for receiving the server response.

       Available in Postfix version 2.1 and later:

       smtp_mx_address_limit (5)
              The  maximal  number  of  MX  (mail  exchanger)  IP
              addresses  that  can  result  from  mail  exchanger
              lookups, or zero (no limit).

       smtp_mx_session_limit (2)
              The  maximal  number  of SMTP sessions per delivery
              request before giving up or delivering to  a  fall-
              back relay host, or zero (no limit).

       smtp_rset_timeout (20s)
              The  SMTP  client  time  limit for sending the RSET
              command, and for receiving the server response.

       Available in Postfix version 2.2 and earlier:

       lmtp_cache_connection (yes)
              Keep Postfix LMTP client connections open for up to
              $max_idle seconds.

       Available in Postfix version 2.2 and later:

       smtp_connection_cache_destinations (empty)
              Permanently  enable SMTP connection caching for the
              specified destinations.

       smtp_connection_cache_on_demand (yes)
              Temporarily enable SMTP connection caching while  a
              destination has a high volume of mail in the active
              queue.

       smtp_connection_reuse_time_limit (300s)
              The amount of time during which Postfix will use an
              SMTP connection repeatedly.

       smtp_connection_cache_time_limit (2s)
              When SMTP connection caching is enabled, the amount
              of time that an unused SMTP client socket  is  kept
              open before it is closed.

       Available in Postfix version 2.3 and later:

       connection_cache_protocol_timeout (5s)
              Time  limit  for  connection cache connect, send or
              receive operations.

TROUBLE SHOOTING CONTROLS
       debug_peer_level (2)
              The increment  in  verbose  logging  level  when  a
              remote  client  or  server matches a pattern in the
              debug_peer_list parameter.

       debug_peer_list (empty)
              Optional list of remote client or  server  hostname
              or  network address patterns that cause the verbose
              logging level to increase by the  amount  specified
              in $debug_peer_level.

       error_notice_recipient (postmaster)
              The  recipient  of  postmaster  notifications about
              mail delivery problems that are caused  by  policy,
              resource, software or protocol errors.

       internal_mail_filter_classes (empty)
              What  categories of Postfix-generated mail are sub-
              ject  to   before-queue   content   inspection   by
              non_smtpd_milters, header_checks and body_checks.

       notify_classes (resource, software)
              The  list of error classes that are reported to the
              postmaster.

MISCELLANEOUS CONTROLS
       best_mx_transport (empty)
              Where the Postfix SMTP client should  deliver  mail
              when it detects a "mail loops back to myself" error
              condition.

       config_directory (see 'postconf -d' output)
              The default location of  the  Postfix  main.cf  and
              master.cf configuration files.

       daemon_timeout (18000s)
              How  much time a Postfix daemon process may take to
              handle a request  before  it  is  terminated  by  a
              built-in watchdog timer.

       delay_logging_resolution_limit (2)
              The  maximal  number  of  digits  after the decimal
              point when logging sub-second delay values.

       disable_dns_lookups (no)
              Disable DNS lookups in the Postfix  SMTP  and  LMTP
              clients.

       inet_interfaces (all)
              The network interface addresses that this mail sys-
              tem receives mail on.

       inet_protocols (ipv4)
              The Internet protocols Postfix will attempt to  use
              when making or accepting connections.

       ipc_timeout (3600s)
              The time limit for sending or receiving information
              over an internal communication channel.

       lmtp_tcp_port (24)
              The default TCP port that the Postfix  LMTP  client
              connects to.

       max_idle (100s)
              The  maximum  amount  of  time that an idle Postfix
              daemon process waits  for  an  incoming  connection
              before terminating voluntarily.

       max_use (100)
              The  maximal  number of incoming connections that a
              Postfix daemon process will service  before  termi-
              nating voluntarily.

       process_id (read-only)
              The  process  ID  of  a  Postfix  command or daemon
              process.

       process_name (read-only)
              The process name of a  Postfix  command  or  daemon
              process.

       proxy_interfaces (empty)
              The network interface addresses that this mail sys-
              tem receives mail on by way of a proxy  or  network
              address translation unit.

       smtp_bind_address (empty)
              An  optional  numerical  network  address  that the
              Postfix SMTP client should bind to when  making  an
              IPv4 connection.

       smtp_bind_address6 (empty)
              An  optional  numerical  network  address  that the
              Postfix SMTP client should bind to when  making  an
              IPv6 connection.

       smtp_helo_name ($myhostname)
              The  hostname to send in the SMTP EHLO or HELO com-
              mand.

       lmtp_lhlo_name ($myhostname)
              The hostname to send in the LMTP LHLO command.

       smtp_host_lookup (dns)
              What mechanisms when the Postfix SMTP  client  uses
              to look up a host's IP address.

       smtp_randomize_addresses (yes)
              Randomize  the  order  of  equal-preference MX host
              addresses.

       syslog_facility (mail)
              The syslog facility of Postfix logging.

       syslog_name (postfix)
              The mail system  name  that  is  prepended  to  the
              process  name  in  syslog  records, so that "smtpd"
              becomes, for example, "postfix/smtpd".

       Available with Postfix 2.2 and earlier:

       fallback_relay (empty)
              Optional list of relay hosts for SMTP  destinations
              that can't be found or that are unreachable.

       Available with Postfix 2.3 and later:

       smtp_fallback_relay ($fallback_relay)
              Optional  list of relay hosts for SMTP destinations
              that can't be found or that are unreachable.

SEE ALSO
       generic(5), output address rewriting
       header_checks(5), message header content inspection
       body_checks(5), body parts content inspection
       qmgr(8), queue manager
       bounce(8), delivery status reports
       scache(8), connection cache server
       postconf(5), configuration parameters
       master(5), generic daemon options
       master(8), process manager
       tlsmgr(8), TLS session and PRNG management
       syslogd(8), system logging

README FILES
       SASL_README, Postfix SASL howto
       TLS_README, Postfix STARTTLS howto

LICENSE
       The  Secure  Mailer  license must be distributed with this
       software.

AUTHOR(S)
       Wietse Venema
       IBM T.J. Watson Research
       P.O. Box 704
       Yorktown Heights, NY 10598, USA

       Command pipelining in cooperation with:
       Jon Ribbens
       Oaktree Internet Solutions Ltd.,
       Internet House,
       Canal Basin,
       Coventry,
       CV1 4LY, United Kingdom.

       SASL support originally by:
       Till Franke
       SuSE Rhein/Main AG
       65760 Eschborn, Germany

       TLS support originally by:
       Lutz Jaenicke
       BTU Cottbus
       Allgemeine Elektrotechnik
       Universitaetsplatz 3-4
       D-03044 Cottbus, Germany

       Revised TLS and SMTP connection cache support by:
       Victor Duchovni
       Morgan Stanley

                                                                       SMTP(8)